Bungalow box 3,3 m²: twin WC cabins [8 ft]

Standard equipment: In each box: 1 door | 1 window | 1 LED light porthole 8 W | 1 power socket | Electric convector heater 500W | Air extractor 170 m³ WC bowl | Washbasin with lever mixer tap | Mirror | Paper dispenser | Electric water heater DIMENSIONS 8 ft model Length: 2,4 m (external) 1,055 m (internal) Width: 1,4 m (external) 1,255 m (internal) Height: 2,54 m (external) 2,20 m (internal) Weight: 430 kg Area: 3,36 m² Floor frame: Cold-rolled and welded steel profiles, 4 welded container corners Floor side rails: 60x60mm steel profile, 2 mm thick Floor cross member: Ω profile, s = 2,5 mm 2 forklift pockets along the length (internal dimensions of the forklift pockets: 250 x 75 mm, centred forklift pockets 780 mm) Corner posts: cold-rolled and welded steel profiles, 2,0 mm thick, screwed to the floor and ceiling frames Roof frame: Cold-rolled and welded steel profiles, 4 corners Roof cross members 2 mm thick Lifting rings: 1 per gable end Roof: corrugated steel sheet riveted to the roof cross members, 0,6 mm thick Floor: Thermal insulation: 60 mm glass wool – fire behaviour A1 (non-combustible) in accordance with EN 13501-1 Protection under the insulation: galvanised sheet plates, 0,6 mm thick Floor: chipboard panel, 22 mm thick Floor covering: aluminium chequer plate, 2 + 0,5 mm thick Roof: Thermal insulation: 120 mm glass wool – fire behaviour A1 (non-combustible) in accordance with EN 13501-1 Ceiling lining: chipboard panel with 10 mm thick coating, white décor CEE power connection sockets: recessed on the outside in the roof frame on the long side Wall elements: Thermal insulation: 45 mm PU foam Panel thickness 70 mm Exterior cladding: profiled, galvanised and lacquered sheet (0,6 mm thick). Fire resistance A1. Interior cladding: galvanised and lacquered sheet, 0,5 mm thick, white décor Gutter: all around on the upper lip of the U-profile at the bottom of the panel Door: Hinges on the left or right. Outward opening. Metal door frame with seal on three sides. Door leaf in galvanised and lacquered sheet on both sides Thermal insulation: 40 mm polystyrene Clear passage: 875 x 2.125 mm Door opening dimensions: 811 x 2.065 mm Window: Plastic frame with white glazing Tilt-and-turn opening Dimensions: 945 x 1.200 mm Insulating glazing with gas filling: 4 / 16 / 4 mm Window sill height (distance between the floor and the top of the lower profile of the window frame): 1575 mm Electrical installation Protection IP44 Voltage: 230V / single-phase / 32A (3×6 mm²) Frequency: 50 Hz Protection: residual current circuit breaker 40 A / 0,03 A, 2-pole (230 V) type A Lighting: 10A circuit breaker, 2-pole, 3×1,5mm² Heating: 13A circuit breaker, 2-pole, 3×2,5mm² Power sockets: 13 A circuit breaker, bipolar, 3×2,5mm² Power outlet: 1 socket Lighting: light switch + LED light porthole 8 W Connection: external CEE connection Sanitary equipment (in each cabin): 1 washbasin with lever mixer tap, metal mirror, WC and paper dispenser, electric water heater Water supply via a ½ », ¾ » or 1″ pipe on one side through a panel. Interior: PP-R piping (in accordance with EN ISO 15874) Operating and connection pressure: max. 4 bar Wastewater drainage: DN 50 and DN110 pipes (external diameter 50 and 110mm) joined inside with a single outlet on one side through a panel